Main Equipment

• Up and down movement ability of torches separately and jointly
• Automatic Ignition System
• Beveling ability
• Water cooling system
• CNC Sentrol 300 Control System
• Cutting Thickness Limits, 6-100 mm
• Cutting Speed 100-1000 mm/min
• Machine movement speed, 12000-18000 mm/min
• Transverse cutting up to 4200 mm
• Longitudinal cutting up to 18000 mm
• Machine Rail Width, 5050 mm
• Machine Width, 6030 mm
• Machine Height, 2400 mm

• Up and down movement ability of torches separately and jointly
• Automatic Ignition System
• Beveling ability
• Water cooling system
• CNC Sentrol 300 Control System
• Cutting Thickness Limits, 100-6 mm
• Cutting Speed 1000-100 mm/min
• Machine movement speed, 12000-18000 mm/min
• Transverse cutting up to 3200 mm
• Longitudinal cutting up to 16000 mm
• Machine Rail Width, 4050 mm
• Machine Width, 5030 mm
• Machine Height, 2400 mm

• Increasing production because of high cutting speed and no need for preheating
• Less thermal deformation in proportion with gas cutting
• Ability of cutting steels and non-iron metals such as aluminum, copper, and anti-rust steel
• Precision cutting

• Sentrol 300 Control System
• Machine movement speed, 12000-18000 mm/min
• Transverse cutting up to 3200 mm
• Machine Rail Width, 4050 mm
• Machine Width, 5030 mm

• High Speed Drilling makes the user able to increase production speed
• Maximum dimensional capacity, 1400×1500 mm
• Maximum drilling diameter, 32 mm

• Together with hydraulic clamp
• Power pressure, 100 Tons
• Plate working dimensions limits, 100x100x6 mm up to 500x1000x25 mm
• Maximum drilling capacity 25 mm, thickness with diameter of 32 mm

• Cutting speed, 330 mm/min
• Cutter rotating speed, 300 RPM
• Longitudinal limits, more than 200 mm
• Transverse limits, more than 150 mm
• Thickness limits, 4-40 mm
• Beveling thickness limits up to 17 mm
• Ability of Beveling with 30, 35, 45, 60 angles

Vertical method in H beam assembling: whereas the relevant part is located in H vertical form and then is welded, high safety of H beam assembling with spot welding is guaranteed.

Ability of making wide H: this equipment may assemble and weld H beams in different sizes including normal sizes up to H beams in different sizes and forms.

High speed of assembling H beams: we needs only less than 30 minutes for making an H beam in a length of 10 m

• Wing width limits, 200-1000 mm
• Body width limits, 200-2500 mm

This machine has been designed to straighten the wings fallen because of post-welding contraction and H wing is straightened using horizontal and vertical distortion hydraulic jacks.

This machine with 8 m/min function causes that production output is increased.

• Wing width limits, 150-800 mm
• Wing thickness limits, 10-70 mm
• Body width limits more than 200 mm
• Body thickness limits, 6-50 mm
• Straitening speed, 8 m/min

• Ability of high speed and accurate drilling of H profiles in 3-axis simultaneously
• Wing and body drilling is performed simultaneously by this machine at the same time
• Alignment and accuracy of wing and body drilling has been guaranteed in proportion of each other
• Working capacity: H with dimension of 150×75 mm up to 600×1300 mm
• Drilling up to diameter of 40 mm